Felling Trailers Inc. will display the FT-10 DDPT Drop Deck Pan Tilt Trailer at The ARA Show 2026, March 2 to 4, in Orlando, Florida.
The FT-10 DDPT is engineered for transporting low-clearance equipment, including scissor lifts and other access equipment that benefits from shallow loading angles. The trailer uses a gravity-based tilt bed rather than traditional ramps.
Design features include a 12-foot deck, four-foot dovetail and an 18-inch approach plate. The bed tilts from a center pivot point, providing approximate load angles between seven and 13 degrees. A locking mechanism secures the bed during transport.
Cargo containment is provided by 10-inch fabricated steel pan sides, with an optional 3/16-inch steel floor plate available. Tie-down accommodations include D-rings and corner tie-downs. A lockable toolbox is optional.
The FT-10 DDPT operates on dual 6,000-pound axles with spring suspension and forward self-adjusting electric brakes. The trailer has a GVWR of 9,980 pounds and a listed payload capacity of 7,380 pounds. LED lighting, sealed wiring and a seven-pole RV plug are standard.
The trailer will be available for viewing at Felling Trailers’ Booth 5232 during the ARA Show.
Lift & Access is part of the Catalyst Communications Network publication family.
