2027 Media Kit available now!

JLG Adds Collision Avoidance Technology to SkySense System

JLG expands SkySense with chassis sensors, operator alerts, and override controls for select scissor and vertical mast lifts.

article-image

JLG Industries has introduced SkySense with Collision Avoidance, an enhanced detection system for select JLG ES scissor lifts and E vertical mast lifts in the United States and Canada. The system expands sensing coverage around a machine's platform and chassis to provide operators with additional awareness of their surroundings.

The updated technology combines four SkySense platform sensors with eight chassis-mounted sensors. According to JLG, the expanded coverage and revised sensing zones are designed to better reflect operating conditions and reduce unnecessary interruptions.

“Job sites are becoming more complex and congested, and customers are looking for technology that can give operators greater awareness while still allowing them to get work done,” says Kristine Baisa, senior product specialist, JLG. “We listened to feedback from customers using SkySense and looked at how the technology could evolve to better address the environments where they are working today. SkySense with Collision Avoidance expands sensing to both the platform and chassis, striking a better balance between added awareness and productivity.”

SkySense with Collision Avoidance incorporates Smart Sensing Control, which includes Dynamic Steer Sensing. The feature automatically focuses sensing in the direction the machine is moving, with the goal of providing relevant alerts and limiting unnecessary interruptions.

The system also includes an Override Mode, a momentary shutoff that allows operators to move closer to their work area or drive through doorways. Audible alarms can be muted, while yellow and red LED indicators provide visual indications of the sensing zone. The system is also compatible with JLG mid-rail deck and perimeter lighting options.

Machines equipped with the technology can be identified by yellow-and-black sensor tubes mounted around the chassis. The visible indicators help fleet owners, site supervisors, and operators distinguish equipped machines.

JLG identifies data center construction, fulfillment centers, warehouses, and industrial facilities as potential applications for the system. These environments can involve multiple trades, materials, and machines operating in close proximity, increasing the need for operators and spotters to remain aware of nearby obstacles.

“Collision avoidance technology is about providing an added level of awareness while allowing operators to remain productive and also helping to reduce reliance on spotters in certain applications,” says Baisa. “Our focus was not simply on adding more sensors. It was on improving how the system responds to the machine, the operator and the work environment.”

SkySense with Collision Avoidance will be available on new machine purchases and through aftermarket kits for specified models in the United States and Canada. Initial compatible models include the JLG ES1330M, ES1530M, ES1930M, ES2632M, and ES1932 scissor lifts, along with the JLG E18MCL and E25MCL vertical mast lifts.

The system can also be retrofitted on ES1330L and ES1530L scissor lift models. JLG said additional models will be added in the future.

Nov 18, 2026

Categories:
Catalyst

Lift & Access is part of the Catalyst Communications Network publication family.